综合知识
1/75
学生成绩表如下表所示。若要计算学生各科成绩、总分和平均分各项的最高分,可先在C10单元格中输入(1),并(2)拖动填充柄至H10单元格,则可自动算出这些学生各科成绩、总分和平均分的最高分。
综合知识
2/75
学生成绩表如下表所示。若要计算学生各科成绩、总分和平均分各项的最高分,可先在C10单元格中输入(1),并(2)拖动填充柄至H10单元格,则可自动算出这些学生各科成绩、总分和平均分的最高分。
综合知识
3/75
《 (3) 》是访问某网站的正确网址。
综合知识
4/75
将某ASCII字符采用偶校验编码(7位字符编码+1位校验码)发送给接收方,在接收方收到的8位数据中,若(4),则能确定传输过程中发生错误。
综合知识
5/75
若内存按字节编址,用存储容量为32K×8比特的存储器芯片构成地址编号A0000H至DFFFFH的内存空间,则至少需要(5)片。
综合知识
6/75
32位微处理器的32是指(6)。
综合知识
7/75
以下关于CPU与主存之间增加高速缓存(Cache)的叙述,不正确的是(7)。
综合知识
8/75
衡量计算机的主要性能指标除了字长、存取周期、运算速度之外,通常还包括(8),因为其反映了(9)。
综合知识
9/75
衡量计算机的主要性能指标除了字长、存取周期、运算速度之外,通常还包括(8),因为其反映了(9)。
综合知识
10/75
用户提出需求并提供经费,委托软件公司开发软件。但在双方商定的协议中未涉及软件著作权的归属,则软件著作权属于(10)所有。
综合知识
11/75
李某购买了一张有注册商标的正版软件光盘,擅自将其复制出售,则该行为侵犯了开发商的(11)。
综合知识
12/75
若不考虑I/O设备本身的性能,则影响计算机系统I/O数据传输速度的主要因素是(12)。
综合知识
13/75
十六进制数CC所对应的八进制数为(13)
综合知识
14/75
CPU中的(14)的值可自动加1,以便实现程序指令的顺序执行。
综合知识
15/75
源程序中的(15)与程序的运行结果无关。
综合知识
16/75
Windows系统中的磁盘碎片整理程序(16)。
综合知识
17/75
对于二维数组a[1..6,1..8],设每个元素占2个存储单元,且以列为主序存储,则元素a[4,4]相对于数组空间起始地址的偏移量是(17)个存储单元。
综合知识
18/75
已知某带权图G的邻接表如下所示,其中表结点的结构为:


则图G是(18)。
综合知识
19/75
在下面的选项中,比较准确地描述了不归零码的是(19)。
综合知识
20/75
关于双绞线,下面的描述中正确的是.(20)。
综合知识
21/75
T1载波采用(21)复用技术,将(22)路话音复用在一条通信线路h,每路话音信号要经过编码器进行采样,采样频率为(23)Hz.
综合知识
22/75
T1载波采用(21)复用技术,将(22)路话音复用在一条通信线路h,每路话音信号要经过编码器进行采样,采样频率为(23)Hz.
综合知识
23/75
T1载波采用(21)复用技术,将(22)路话音复用在一条通信线路h,每路话音信号要经过编码器进行采样,采样频率为(23)Hz.
综合知识
24/75
路由器工作在(24)。
综合知识
25/75
在下列应用层协议中,利用UDP实现无连接传输的是(25),利用TCP实现面向连接传输的是(26)。
综合知识
26/75
在下列应用层协议中,利用UDP实现无连接传输的是(25),利用TCP实现面向连接传输的是(26)。
综合知识
27/75
IP地址块222.125.80.128/26包含了(27)个可用主机地址,这些可用地址中最小的地址是(28),最大地址是(29)。
综合知识
28/75
IP地址块222.125.80.128/26包含了(27)个可用主机地址,这些可用地址中最小的地址是(28),最大地址是(29)。
综合知识
29/75
IP地址块222.125.80.128/26包含了(27)个可用主机地址,这些可用地址中最小的地址是(28),最大地址是(29)。
综合知识
30/75
使用CIDR技术把4个网络202.17.0.0/21、202.17.16.0/20、202.17.8.0/22和202.17.34.0/23汇聚成一条路由信息,得到的目标地址是(30)。
综合知识
31/75
IPv6地址为(31)位。
综合知识
32/75
按照域名系统的定义,域名www.sales.microsoft.com包含4个标识符,其中(32)是顶级域名,(33)是注册给组织或个人的二级域名。
综合知识
33/75
按照域名系统的定义,域名www.sales.microsoft.com包含4个标识符,其中(32)是顶级域名,(33)是注册给组织或个人的二级域名。
综合知识
34/75
下面的FTP命令中,用于在远程计算机上创建目录的命令是(34)。
综合知识
35/75
IEEE 802.11标准定义的Ad hoc网络是(35)。
综合知识
36/75
IEEE 802.3规定的最小帧长是(36)字节。
综合知识
37/75
下面关于快速以太网标准100BASE-TX的描述中,正确的是(37)。
综合知识
38/75
以太网交换机的Console端口与PC机的(38)端口通过控制台电缆相连,默认的数据速率是(39)。
综合知识
39/75
以太网交换机的Console端口与PC机的(38)端口通过控制台电缆相连,默认的数据速率是(39)。
综合知识
40/75
在交换机上实现VLAN,可以采用静态或动态的方法。下面关于静态VLAN的描述中,正确的是(40)。
综合知识
41/75
HTML语言中,可使用(41)标签将脚本插入HTML文档。
综合知识
42/75
以下HTML代码中,创律指向邮箱地址的链接正确的是(42)。
综合知识
43/75
在HTML语言中,(43)可用来为图像定义一串预备的可替换的文本。
综合知识
44/75
下图是HTML文件submif.html在IE中的部分显示效果。

请完成下面submif.html中部分html代码。
综合知识
45/75
下图是HTML文件submif.html在IE中的部分显示效果。

请完成下面submif.html中部分html代码。
综合知识
46/75
在百度搜索引擎中输入内容为:网络管理员 -大纲,其作用是(46)。
综合知识
47/75
Outlook Express作为邮件代理软件有诸多优点,下列说法中错误的是(47)。
综合知识
48/75
常见的图像文件格式不包括(48)。
综合知识
49/75
在http://www.test.com/main/index.htm中,index.htm是(49)。
综合知识
50/75
POP3服务默认的TCP端口号是(50)。
综合知识
51/75
下列关于网络攻击的说法中,错误的是(51)。
综合知识
52/75
在包过滤防火墙中,定义数据包过滤规则的是(52)。
综合知识
53/75
在Windows系统中,管理权限最高的组是(53)。
综合知识
54/75
如果杀毒软件报告一系列的Word文档被病毒感染,则可以推断病毒类型是(54),如果用磁盘检测工具(CHKDSK、SCANDISK等)检测磁盘发现大量文件链接地址错误,表明磁盘可能被(55)病毒感染。
综合知识
55/75
如果杀毒软件报告一系列的Word文档被病毒感染,则可以推断病毒类型是(54),如果用磁盘检测工具(CHKDSK、SCANDISK等)检测磁盘发现大量文件链接地址错误,表明磁盘可能被(55)病毒感染。
综合知识
56/75
下面加密算法中属于公钥加密算法的是(56)。
综合知识
57/75
在千兆以太网标准中,(57)使用5类双绞线作为网络传输介质。
综合知识
58/75
(58)可以连续向主机192.168.1.100发送测试数据包,直到按下Ctrl+C键中断。
综合知识
59/75
在WindowsXP中,可采用(59)命令手工释放从DHCP服务器获取的IP地址。
综合知识
60/75
在SNMP支持的四种操作中,(60)用于修改对象的值。
综合知识
61/75
要添加一条到达目标10.41.0.0(子网掩码为255.255.0.0)的路由,下一跃点地址为10.27.0.1,则键入(61)命令。
综合知识
62/75
在路由器配置中,将新的静态路由添加进路由表需要在(62)下进行。
综合知识
63/75
在Linux操作系统中,默认的系统管理帐户为(63)。
综合知识
64/75
在Linux操作系统中,可以通过(64)命令终止进程的执行。
综合知识
65/75
下列关于ADSL的描述中,错误的是(65)。
综合知识
66/75
下列DNS服备器中负责非本地域名杳询的是(66)。
综合知识
67/75
下列关于DHCP服务器的描述中,正确的是(67)。
综合知识
68/75
建筑物综合布线系统中的干线子系统是(68)。
综合知识
69/75
交换机配置命令2950A(vlan)#vlan3 name vlan3的作用是(69)。
综合知识
70/75
采用OSPF协议配置路由协议时,主干区域为(70)。
综合知识
71/75
Both bus and tree topologies are characterized by the use of multipoint(71).For the bus, all stations attach, through appropriate hardware(72)known as a tap, directly to a linear transmission medium, or bus. Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the(73).A transmission from any station propagates the length of the medium in both directions and can be received by all other(74).At each end of the bus is a(75).which absorbs any signal, removing it from the bus.
综合知识
72/75
Both bus and tree topologies are characterized by the use of multipoint(71).For the bus, all stations attach, through appropriate hardware(72)known as a tap, directly to a linear transmission medium, or bus. Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the(73).A transmission from any station propagates the length of the medium in both directions and can be received by all other(74).At each end of the bus is a(75).which absorbs any signal, removing it from the bus.
综合知识
73/75
Both bus and tree topologies are characterized by the use of multipoint(71).For the bus, all stations attach, through appropriate hardware(72)known as a tap, directly to a linear transmission medium, or bus. Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the(73).A transmission from any station propagates the length of the medium in both directions and can be received by all other(74).At each end of the bus is a(75).which absorbs any signal, removing it from the bus.
综合知识
74/75
Both bus and tree topologies are characterized by the use of multipoint(71).For the bus, all stations attach, through appropriate hardware(72)known as a tap, directly to a linear transmission medium, or bus. Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the(73).A transmission from any station propagates the length of the medium in both directions and can be received by all other(74).At each end of the bus is a(75).which absorbs any signal, removing it from the bus.
综合知识
75/75
Both bus and tree topologies are characterized by the use of multipoint(71).For the bus, all stations attach, through appropriate hardware(72)known as a tap, directly to a linear transmission medium, or bus. Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the(73).A transmission from any station propagates the length of the medium in both directions and can be received by all other(74).At each end of the bus is a(75).which absorbs any signal, removing it from the bus.